protonvpn-qbittorrent/entrypoint.sh

#!/usr/bin/env bash

set -o errexit

info() {
    printf "I %5d %s\n" "${$}" "${*}"
}

fatal() {
    printf "F %5d %s\n" "${$}" "${*}" >&2
    exit 1
}

iptables-save | tee /tmp/rules.v4.$$.conf
ip6tables-save | tee /tmp/rules.v6.$$.conf

default_route_ip=$(ip route | grep '^default' | awk '{print $3}')
if [[ -z "${default_route_ip}" ]]; then
    fatal "Error: No default route configured"
fi

if [[ "$(cat /proc/sys/net/ipv4/conf/all/src_valid_mark)" != "1" ]]; then
    fatal "Error: sysctl net.ipv4.conf.all.src_valid_mark=1 is not set"
fi

# sysctl is set by container, wg-quick will then error
sed -i "s:sysctl -q net.ipv4.conf.all.src_valid_mark=1:echo Skipping setting net.ipv4.conf.all.src_valid_mark:" /usr/bin/wg-quick

WIREGUARD_INTERFACE="${WIREGUARD_INTERFACE:-wg0}"

if [ ! -f "/etc/wireguard/${WIREGUARD_INTERFACE}.conf" ]; then
    fatal "Error: Configuration file /etc/wireguard/${WIREGUARD_INTERFACE}.conf does not exist"
fi

info "Bringing up wireguard interface: ${WIREGUARD_INTERFACE}..."
wg-quick up ${WIREGUARD_INTERFACE}

shutdown () {
    info "shutting down wireguard interface: ${WIREGUARD_INTERFACE}..."
    wg-quick down ${WIREGUARD_INTERFACE}
    info "restoring iptables..."
    iptables-restore -n < /tmp/rules.v4.$$.conf
    info "restoring ip6tables..."
    ip6tables-restore -n < /tmp/rules.v6.$$.conf
}
trap shutdown EXIT

wg show
WIREGUARD_FWMARK=$(wg show ${WIREGUARD_INTERFACE} fwmark)

# allow connections from container subnets
for container_subnet in $(ip -o addr show | awk '/^(\d)+: eth(.+)inet / {print $4}')
do
    iptables -I INPUT -s ${container_subnet} -j ACCEPT
    iptables -I OUTPUT -d ${container_subnet} -j ACCEPT
done

# allow connections to local subnets specified by user, need to add routes since wireguard interface has 0.0.0.0/0 allowed ips
for local_subnet in ${LOCAL_IPV4_SUBNETS//,/$IFS}
do
    iptables -I INPUT -s ${local_subnet} -j ACCEPT
    iptables -I OUTPUT -d ${local_subnet} -j ACCEPT
    ip route add ${local_subnet} via ${default_route_ip}
done

# established connections
iptables -I INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
iptables -I OUTPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT

# kill switches for ipv4 -- @see wg-quick(8)
iptables -A OUTPUT ! -o ${WIREGUARD_INTERFACE} -m mark ! --mark ${WIREGUARD_FWMARK} -m addrtype ! --dst-type LOCAL -j REJECT --reject-with icmp-admin-prohibited

for container_subnet in $(ip -o addr show | awk '/^(\d)+: eth(.+)inet6 / {print $4}')
do
    ip6tables -I INPUT -s ${container_subnet} -j ACCEPT
    ip6tables -I OUTPUT -d ${container_subnet} -j ACCEPT
done

# established connections
ip6tables -I INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
ip6tables -I OUTPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT

# kill switches for ipv6 -- @see wg-quick(8)
ip6tables -A OUTPUT ! -o ${WIREGUARD_INTERFACE} -m mark ! --mark ${WIREGUARD_FWMARK} -m addrtype ! --dst-type LOCAL -j REJECT --reject-with icmp6-adm-prohibited

iptables-save | tee /tmp/rules.v4.${WIREGUARD_INTERFACE}.$$.conf
ip6tables-save | tee /tmp/rules.v6.${WIREGUARD_INTERFACE}.$$.conf

sleep 8 &
wait ${!}

# check to see if tunnel allows port forwarding
natpmpc -g 10.2.0.1

# give some delay until qbittorrent container launches
sleep 5 &
wait ${!}

# qbittorrent webui host
WEBUI_HOST="${WEBUI_HOST:-http://localhost:8080}"
WEBUI_USERNAME="${WEBUI_USERNAME:-}"
WEBUI_PASSWORD="${WEBUI_PASSWORD:-}"
WEBUI_COOKIE_JAR="/tmp/qbittorrent-webui.$$.cookie"

qb_webui_curl() {
    curl \
        --silent \
        --show-error \
        --fail-with-body \
        --header "Referer: ${WEBUI_HOST}" \
        ${WEBUI_COOKIE_ARGS+"${WEBUI_COOKIE_ARGS[@]}"} \
        "$@"
}

# from this point on, its best effort, so just keep going and don't fail the container
set +o errexit

if [[ -n "${WEBUI_USERNAME}" || -n "${WEBUI_PASSWORD}" ]]; then
    login_response=$(
        curl \
            --silent \
            --show-error \
            --fail-with-body \
            --header "Referer: ${WEBUI_HOST}" \
            --cookie-jar "${WEBUI_COOKIE_JAR}" \
            --data-urlencode "username=${WEBUI_USERNAME}" \
            --data-urlencode "password=${WEBUI_PASSWORD}" \
            "${WEBUI_HOST}/api/v2/auth/login"
    )
    if [[ "${login_response}" == "Ok." ]]; then
        WEBUI_COOKIE_ARGS=(--cookie "${WEBUI_COOKIE_JAR}")
        info "Authenticated with qBittorrent Web UI."
    else
        info "Warning: qBittorrent Web UI login failed: ${login_response}"
    fi
fi

# loop now forever keeping port forward up to date (protonvpn)
# https://protonvpn.com/support/port-forwarding-manual-setup
while true; do
    tcp_output=$(natpmpc -a 1 0 tcp 60 -g 10.2.0.1)
    tcp_port=$(echo "${tcp_output}" | sed -n 's/.*Mapped public port \([0-9]\+\).*/\1/p')

    udp_output=$(natpmpc -a 1 0 udp 60 -g 10.2.0.1)
    udp_port=$(echo "${udp_output}" | sed -n 's/.*Mapped public port \([0-9]\+\).*/\1/p')

    if ! [[ "${tcp_port}" =~ ^[0-9]+$ && "${udp_port}" =~ ^[0-9]+$ ]]; then
        info "Warning: unable to parse forwarded ports. tcp='${tcp_port}' udp='${udp_port}'"
        sleep 45 &
        wait ${!}
        continue
    fi

    if [[ "${tcp_port}" -ne "${udp_port}" ]]; then
        info "Warning: tcp_port (${tcp_port}) and udp_port (${udp_port}) are different"
    fi

    # failure to connect to webui, we don't want to fail the loop, just log the error and try again
    preferences=$(qb_webui_curl "${WEBUI_HOST}/api/v2/app/preferences")
    if [[ "${?}" -ne 0 ]]; then
        info "Warning: unable to read qBittorrent preferences from ${WEBUI_HOST}"
        sleep 45 &
        wait ${!}
        continue
    fi

    current_port=$(echo "${preferences}" | jq -r .listen_port)
    random_port=$(echo "${preferences}" | jq -r .random_port)
    upnp=$(echo "${preferences}" | jq -r .upnp)
    if ! [[ "${current_port}" =~ ^[0-9]+$ ]]; then
        info "Warning: qBittorrent preferences did not contain a numeric listen_port: ${current_port}"
        sleep 45 &
        wait ${!}
        continue
    fi

    if [[ "${tcp_port}" -ne "${current_port}" || "${random_port}" != "false" || "${upnp}" != "false" ]]; then
        info "Port settings changed from listen_port=${current_port}, random_port=${random_port}, upnp=${upnp} to listen_port=${tcp_port}, random_port=false, upnp=false. Updating app preferences..."

        qb_webui_curl \
            --request POST \
            --data "json={\"listen_port\": ${tcp_port}, \"random_port\": false, \"upnp\": false}" \
            "${WEBUI_HOST}/api/v2/app/setPreferences"
        if [[ "${?}" -ne 0 ]]; then
            info "Warning: unable to update qBittorrent port preferences"
            sleep 45 &
            wait ${!}
            continue
        fi

        updated_port=$(qb_webui_curl "${WEBUI_HOST}/api/v2/app/preferences" | jq -r .listen_port)
        if [[ "${updated_port}" != "${tcp_port}" ]]; then
            info "Warning: qBittorrent still reports listen_port=${updated_port} after update"
        fi
    fi

    sleep 45 &
    wait ${!}
done

info "exiting."
exit 0